How Long Is The Drive Belt On A Craftsman Riding Mower?

Can a lawn mower belt stretch?

Yes, lawnmower belts can stretch.

When it stretches more than it should, it can result in the drive belts lose grip on the pulley system.

When that happens, the efficiency of mowers takes a dip..

How do you measure a missing v belt?

Use a cloth measuring tape (not a steel one) and wrap it around the outside of the belt. You also use a thin string to take this measurement and place it on a steel tape to get the correct length. Next, for “A” Belts (1/2” width) subtract two-inches from the outside measurement to select the correct V-belt.

Why does my drive belt keep coming off my riding mower?

The drive belt may come off a riding mower because it is damaged or loose. … When loose, the belt may slip, resulting in friction that, if it creates enough heat, can lead to a fire in the mower’s engine.

How do you change the drive belt on a Murray riding lawn mower?

HOW TO REPLACE THE MOTION DRIVE BELTRemove the mower housing. … Completely push the pedal forward and engage the parking. … Remove the idler pulley (Figure 25).Loosen the belt guides that are around the drive pulley.Remove the motion drive belt from the drive pulley.To remove the motion drive belt from the stack pulley, pull the.More items…

What is a drive belt on a riding lawn mower?

The ground drive belt connects the engine crankshaft to the transaxle pulley to drive the rear wheels. If the belt breaks, the lawn tractor won’t move. If the belt is worn, the lawn tractor moves sluggishly because the belt slips on the pulley.

How do you determine your belt size?

An easy way to determine belt size is to simply “add 2″ to your off-the-rack trouser size. For example, if you wear a 36” waist trouser, then a 38 belt size will be a safe bet. Most will find this simple formula works best for pants worn at a traditional height–close to the natural waistline.

What size belt do I need for a 42 inch deck?

There’s no standard size for a 42-inch-cut riding mower. Each model uses a different size belt. To give examples, some models use a drive belt that is ½ inch wide by 92 inches in length, while others use a belt ½ inch wide by 85 inches in length.

What size belt do I need for my Craftsman riding mower?

AYP / Craftsman / Sears Drive Belt No. Primary mower belt. Size: 1/2″ x 84-1/6″. Replaces part numbers 160885, 532139573, and 139573.

What size belt does a craftsman 42 inch deck?

144959. AYP / Craftsman / Sears Deck Belt fits 42″, 46″ & 50″ Decks built since 1995. Size: 1/2″ x 95-1/2″.

What size drive belt does a craftsman lt1000 take?

95.5″95.5″ is the correct size.

What size is a 42 inch belt?

Please note – some belts don’t have pinholes. In that situation: – measurments will be the same as for pin buckle belts. From the end of a strap will be 15 cm or 6 inches that are not shown in the measurment….Ladies Belt Sizing.BELT SIZE INCHESBELT SIZE CMWOMEN’S SIZES3692M/L3897L40102L/XL42107XL7 more rows

How long is a 144959 belt?

95.5 inReplace worn and broken equipment with a reliable A & I Products 144959 Kevlar Deck Belt. The Kevlar lawn mower belts are for use with 38 in., 42 in. and 44 in….SpecificationDescriptionProduct Length95.5 in.Brand CompatibilityCraftsman, Ariens, Husqvarna and AYP12 more rows